Using the keyboard to enable USB booting

Carlos Camargo cicamargoba at gmail.com
Mon Aug 31 09:12:12 EDT 2009


Hi Adam

The switch hole is in the battery "hole" ?



Can you please check the file:

http://downloads.qi-hardware.com/hardware/qi_avt2/kicad/tQi.tar.bz2

There are some kicad footprints, we need some feedback about the size, pitch
etc

Thanks


Carlos


On Mon, Aug 31, 2009 at 7:57 AM, Adam Wang <adam at qi-hardware.com> wrote:

> Hi,
>
>
>  No, my ideal was totally not good. so we'll have a real like slide
>> switch[1] for bottom of board or slide switch[2] for side of board. But I
>> have to check if having bottom or side of device from layout space check.
>> And check with vendor which one is the most popular and easier get.
>> Will keep list posted.
>> Thanks,
>> Adam
>>
>>  After confirmed with part vendor and checked available layout placement,
> the selected slide switch[1] for boot selection is located around reset key.
> Please ref. to [2].
> It will need to drill a small hole on bottom mechanical case, so will be a
> little ugly from bottom view.
> Adam
>
> [1] http://www.hy1688.com/SWITCH/SLIDE%20SWITCH/SLIDE/EPS40XX.htm
> [2]
> http://downloads.qi-hardware.com/hardware/qi_avt2/pcb/PLACEMENT/boot_switch.jpg
>
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>



-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20090831/2f3f6ff4/attachment.htm>


More information about the discussion mailing list


interactive