Impresions new image 20091216

David Reyes Samblas Martinez david at tuxbrain.com
Wed Dec 16 18:32:37 EST 2009


Here is a brief report image flashe using the reflash_ben.sh :

*Perceive Increased boot speed

*Bigger fonts, personaly I prefer the previous ones but it it matter
of taste I guess

*Powerbutton don't work to shutdown

*Sound still disable by default, you have to run alsamixer to enable
Output Mixer DAC

*Sound is too loud to the speaker, at 100 speaker distorts like a
Manowar bass solo, I think actual 0% has to be the 100% level , on
headphones volume is ok no distorsion, and sound is good.

*Yes it can play wav files with aplay :) and sounds pretty good to
such small speaker and low price device

*ZimReader , I use this file that works on my PC[1] (3,2Gb) Program
starts and I can connect to Ben 8080 port  on PC navigato it only
loads the navigation part and was unable to serve an article, here is
the output:

#ZimReader -l 192.168.1.1 wikipedia_es_kiwix_120000\+_06_2009_alpha4.zim
IP 192.168.1.1 port 8080
Wikipedia ist jetzt unter http://localhost:8080/ verfügbar
Die Einstellungen können unter $HOME/.ZimReader geändert werden
---[and after a while]-----
1969-09-25 10:23:17.54669 [663.7176] FATAL tntnet.worker - requesttime
600 seconds in thread 2051 exceeded - exit process

also here is the top info when ZimReader is loaded
Mem: 27380K used, 1092K free, 0K shrd, 36K buff, 14024K cached
CPU:   0% usr   0% sys   0% nic   0% idle   0% io 100% irq   0% sirq
Load average: 1.00 1.00 0.92 1/41 684
  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
  654   647 root     R     1364   5%   1% top
  676   627 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  677   676 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  684   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  683   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  679   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  680   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  681   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  678   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  682   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
  658     1 root     D     4692  16%   0% ZimReader -l 192.168.1.1 wikipedia_es
  432     1 root     S     1372   5%   0% /bin/ash --login
  440     1 root     S     1372   5%   0% syslogd -C16

Too much memory hungry? maybe a swapfile can help?

* vido, just a blank screen and I need to reboot the  device,  here is
the output:
root at BenNanoNote:/card/zipfiles# vido wikipedia_es_kiwix_120000\+_06_2009_alpha4
.zim
commandline read: vido

   ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.2 |~~~~~~~~~~~~~~~~~~~~~~~~~~
        (c) 2001-2009  The world wide DirectFB Open Source Community
        (c) 2000-2004  Convergence (integrated media) GmbH
      ----------------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2009-12-15 22:50)
(*) Direct/Thread: Started 'VT Switcher' (624) [CRITICAL OTHER/OTHER
0/0] <2093056>...
(*) Direct/Thread: Started 'VT Flusher' (625) [DEFAULT OTHER/OTHER
0/0] <2093056>...
(*) DirectFB/FBDev: Found 'JZ4740 FB' (ID 0) with frame buffer at
0x01980000, 300k (MMIO 0x13050000, 64k)
(*) Direct/Thread: Started 'Linux Input' (626) [INPUT OTHER/OTHER 0/0]
<2093056>...
(*) DirectFB/Input: gpio-keys (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (627) [INPUT OTHER/OTHER 0/0]
<2093056>...
(*) DirectFB/Input: matrix-keypad (2) 0.1 (directfb.org)
(*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) Direct/Thread: Started 'EventBufferFeed' (628) [MESSAGING
OTHER/OTHER 0/0] <2093056>...
GConf Error: Failed to contact configuration server; some possible
causes are that you need to enable TCP/IP networking for ORBit, or you
have stale NFS locks due to a system crash. See
http://www.gnome.org/projects/gconf/ for information. (Details -  1:
Failed to get connection to session: dbus-launch failed to autolaunch
D-Bus session: Autolaunch requested, but X11 support not compiled in.
Cannot continue.
)
GConf Error: Failed to contact configuration server; some possible
causes are that you need to enable TCP/IP networking for ORBit, or you
have stale NFS locks due to a system crash. See
http://www.gnome.org/projects/gconf/ for information. (Details -  1:
Failed to get connection to session: dbus-launch failed to autolaunch
D-Bus session: Autolaunch requested, but X11 support not compiled in.
Cannot continue.
)

gtkhtml-ERROR **: gconf error: Failed to contact configuration server;
some possible causes are that you need to enable TCP/IP networking for
ORBit, or you have stale NFS locks due to a system crash. See
http://www.gnome.org/projects/gconf/ for information. (Details -  1:
Failed to get connection to session: dbus-launch failed to autolaunch
D-Bus session: Autolaunch requested, but X11 support not compiled in.
Cannot continue.
)

aborting...
(!) [  622:    0.000] --> Caught signal 6 (sent by pid 622, uid 0) <--

*gtkperf, scrolling on gtkTexview text box and in firt tab test
results box produce is slow and produce a black box than hide text but
on Help tab text box scroll works flawlessly , Drawing doesn't draws
anything

Well that's all for now, do you want I test anything more on the just
reflashed distro?

Keep on the good work :)

David Reyes Samblas Martinez
http://www.tuxbrain.com
Open ultraportable & embedded solutions
Qi inside NanoNote, Arduino, Openmoko, Openpandora
Hey, watch out!!! There's a linux in your pocket!!!




More information about the discussion mailing list


interactive