Impresions new image 20091216

Xiangfu Liu xiangfu at qi-hardware.com
Wed Dec 16 23:53:30 EST 2009


David Reyes Samblas Martinez wrote:
> Here is a brief report image flashe using the reflash_ben.sh :
> 
> *Perceive Increased boot speed
> 
> *Bigger fonts, personaly I prefer the previous ones but it it matter
> of taste I guess
> 
> *Powerbutton don't work to shutdown
> 
Hi Mirko can you add the "fnkeys /dev/input/event0" to your rootfs image.

> *Sound still disable by default, you have to run alsamixer to enable
> Output Mixer DAC
> 
just committed.

> *Sound is too loud to the speaker, at 100 speaker distorts like a
> Manowar bass solo, I think actual 0% has to be the 100% level , on
> headphones volume is ok no distorsion, and sound is good.
> 
> *Yes it can play wav files with aplay :) and sounds pretty good to
> such small speaker and low price device
> 
> *ZimReader , I use this file that works on my PC[1] (3,2Gb) Program
> starts and I can connect to Ben 8080 port  on PC navigato it only
> loads the navigation part and was unable to serve an article, here is
> the output:
> 
> #ZimReader -l 192.168.1.1 wikipedia_es_kiwix_120000\+_06_2009_alpha4.zim
> IP 192.168.1.1 port 8080
> Wikipedia ist jetzt unter http://localhost:8080/ verfügbar
> Die Einstellungen können unter $HOME/.ZimReader geändert werden
> ---[and after a while]-----
> 1969-09-25 10:23:17.54669 [663.7176] FATAL tntnet.worker - requesttime
> 600 seconds in thread 2051 exceeded - exit process
> 
> also here is the top info when ZimReader is loaded
> Mem: 27380K used, 1092K free, 0K shrd, 36K buff, 14024K cached
> CPU:   0% usr   0% sys   0% nic   0% idle   0% io 100% irq   0% sirq
> Load average: 1.00 1.00 0.92 1/41 684
>   PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
>   654   647 root     R     1364   5%   1% top
>   676   627 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   677   676 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   684   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   683   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   679   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   680   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   681   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   678   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   682   677 root     S     9080  32%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   658     1 root     D     4692  16%   0% ZimReader -l 192.168.1.1 wikipedia_es
>   432     1 root     S     1372   5%   0% /bin/ash --login
>   440     1 root     S     1372   5%   0% syslogd -C16
> 
> Too much memory hungry? maybe a swapfile can help?
> 
> * vido, just a blank screen and I need to reboot the  device,  here is
> the output:
> root at BenNanoNote:/card/zipfiles# vido wikipedia_es_kiwix_120000\+_06_2009_alpha4
> .zim
> commandline read: vido
> 
>    ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.2 |~~~~~~~~~~~~~~~~~~~~~~~~~~
>         (c) 2001-2009  The world wide DirectFB Open Source Community
>         (c) 2000-2004  Convergence (integrated media) GmbH
>       ----------------------------------------------------------------
> 
> (*) DirectFB/Core: Single Application Core. (2009-12-15 22:50)
> (*) Direct/Thread: Started 'VT Switcher' (624) [CRITICAL OTHER/OTHER
> 0/0] <2093056>...
> (*) Direct/Thread: Started 'VT Flusher' (625) [DEFAULT OTHER/OTHER
> 0/0] <2093056>...
> (*) DirectFB/FBDev: Found 'JZ4740 FB' (ID 0) with frame buffer at
> 0x01980000, 300k (MMIO 0x13050000, 64k)
> (*) Direct/Thread: Started 'Linux Input' (626) [INPUT OTHER/OTHER 0/0]
> <2093056>...
> (*) DirectFB/Input: gpio-keys (1) 0.1 (directfb.org)
> (*) Direct/Thread: Started 'Linux Input' (627) [INPUT OTHER/OTHER 0/0]
> <2093056>...
> (*) DirectFB/Input: matrix-keypad (2) 0.1 (directfb.org)
> (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (directfb.org)
> (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
> (*) Direct/Thread: Started 'EventBufferFeed' (628) [MESSAGING
> OTHER/OTHER 0/0] <2093056>...
> GConf Error: Failed to contact configuration server; some possible
> causes are that you need to enable TCP/IP networking for ORBit, or you
> have stale NFS locks due to a system crash. See
> http://www.gnome.org/projects/gconf/ for information. (Details -  1:
> Failed to get connection to session: dbus-launch failed to autolaunch
> D-Bus session: Autolaunch requested, but X11 support not compiled in.
> Cannot continue.
> )
> GConf Error: Failed to contact configuration server; some possible
> causes are that you need to enable TCP/IP networking for ORBit, or you
> have stale NFS locks due to a system crash. See
> http://www.gnome.org/projects/gconf/ for information. (Details -  1:
> Failed to get connection to session: dbus-launch failed to autolaunch
> D-Bus session: Autolaunch requested, but X11 support not compiled in.
> Cannot continue.
> )
> 
> gtkhtml-ERROR **: gconf error: Failed to contact configuration server;
> some possible causes are that you need to enable TCP/IP networking for
> ORBit, or you have stale NFS locks due to a system crash. See
> http://www.gnome.org/projects/gconf/ for information. (Details -  1:
> Failed to get connection to session: dbus-launch failed to autolaunch
> D-Bus session: Autolaunch requested, but X11 support not compiled in.
> Cannot continue.
> )
> 
> aborting...
> (!) [  622:    0.000] --> Caught signal 6 (sent by pid 622, uid 0) <--
> 
> *gtkperf, scrolling on gtkTexview text box and in firt tab test
> results box produce is slow and produce a black box than hide text but
> on Help tab text box scroll works flawlessly , Drawing doesn't draws
> anything
> 
> Well that's all for now, do you want I test anything more on the just
> reflashed distro?
> 
> Keep on the good work :)
> 
> David Reyes Samblas Martinez
> http://www.tuxbrain.com
> Open ultraportable & embedded solutions
> Qi inside NanoNote, Arduino, Openmoko, Openpandora
> Hey, watch out!!! There's a linux in your pocket!!!
> 
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer


-- 
Xiangfu Liu
Email: xiangfu at qi-hardware dot com
Web: http://www.qi-hardware.com





More information about the discussion mailing list


interactive