Start from nature and take a trip for venture
wolfgang at qi-hardware.com
Tue Jul 21 09:44:53 EDT 2009
thanks I will run this test on our board soon and let you know.
I agree speed is my #1 priority at this point.
Speed is addictive.
The proprietary software that is shipped with the device ours is based upon
boots in 4-5 seconds. Our current image in around 10 seconds (haven't seen it
So first we want to match the proprietary software - 4 seconds.
We are also making small changes to the board, so I want to make sure we are
running the tests with the hardware we will ship in our first version.
Will report back, thanks for your numbers,
On Tue, Jul 21, 2009 at 03:08:02PM +0200, Nicola Mfb wrote:
> On Tue, Jul 21, 2009 at 9:30 AM, Adam Wang<adam at qi-hardware.com> wrote:
> > Hi All,
> > This is Adam and I am working on the hardware. We are using KiCAD and all
> > files are at github.com/adamwang. Any questions about hardware please ask me
> > any time.
> Just my little wish. Please adopt a fast bus for flash/sd, yesterday I
> launched a dd if=/dev/zero of=foo bs=1024k count=10; sync on a friend
> iphone, and performed about 7.5 megabyte/s.
> This will contribute to responsiveness of the device when launching application.
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
More information about the discussion