wolfgang at qi-hardware.com
Wed Jul 29 12:07:34 EDT 2009
the schematic is inside the kicad files at
Right now you need to install KiCAD first to view them. Later we plan to have
the schematics automatically generated in PDF form with every commit into
KiCAD, but some more work needed on the server side first. Needs at least
1 month to get there.
For the LCM datasheet, similar story. downloads.qi-hardware.com is not setup
yet. We have almost all datasheets in openly redistributable formats, so once
the downloads part is setup things should be good.
We should get to this in the next week or so...
On Wed, Jul 29, 2009 at 11:35:21PM +0800, deng_ya_nuo wrote:
> Where's the schmatic ? and the LCD pdf ?
> I don't know much, but I have debug a LCD panel with the RGB or YUV input.
> At that case, the refresh is not the bussiness of the CPU, but the LCD
> inside only.
> So I need the schmatic, and the pdf of the LCD to see what happen.
> Thank you.
> 2009/7/29 W.G. van de Hulst <suyckerbol at gmail.com>:
> > I was reading about this issue over at
> > http://www.dingux.com/2009/07/on-screen-tearing.html
> > So I naturally wonder if the R/W signal for the LCD on the SoC is
> > connected to the LCD for syncing, and if not, if that can still be
> > fixed at this late stage.
> > _______________________________________________
> > Qi Developer Mailing List
> > Mail to list (members only): developer at lists.qi-hardware.com
> > Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> from deng.ya.nuo@@gmail.com , 029-8231 2155
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
More information about the discussion