AW: Re: Manual

Mirko Lindner mirko at qi-hardware.com
Wed Nov 11 02:43:08 EST 2009


Hey,

Sure,no problem. I always use a screw driver, as I don't have any carbonized rubber, but it certainly sounds like the better idea :)

/mirko

-- Sent from my Palm Prē
Wolfgang Spraul schrieb:

Mirko,

on page 5 and 6 we talk about using a screw driver for USB booting.

That has never worked for me, does it really work?

Also it sounds a bit scary because if you use a lot of pressure you

may damage or rip off the test points.

Instead, I believe Yi has sourced carbonized rubber buttons that we

will include with every Ben NanoNote.

http://downloads.qi-hardware.com/hardware/Photos/carbonized_rubber_button.jpg

Maybe we should talk about this button instead?

Wolfgang



On Tue, Nov 10, 2009 at 11:06:26PM +0100, Mirko Lindner wrote:

> Hey,

> 

> I had to redo the layout of the manual, the data of b6 and b7 in my scribus

> version was incorrect and I simply didn't notice it. The format *should* now

> be correct.

> 

> The new pdf also has all fonts embedded, so that there shouldn't be any

> issue when opening it.

> 

> /mirko

> 

> PS: I updated the git as well, hope it's all there :)

> 

> On Tue, Nov 10, 2009 at 2:32 PM, ZhangJieJing <kzjeef at gmail.com> wrote:

> 

> > Hi, Mirko.

> >

> > Yes, I can open the pdf file.

> >

> > but the characters in the png was not good. the gap between characters was

> > too small.

> >

> > Did anyone else noticed that?

> > ---

> > Best regards,

> > Zhang Jiejing

> >

> >

> >

> > On Tue, Nov 10, 2009 at 3:43 PM, Mirko Lindner <mirko at qi-hardware.com>wrote:

> >

> >> Hey Zhang,

> >>

> >> how did you get to this result?

> >>

> >> Did you open the pdf? Did you create a png from scribus?

> >>

> >> Is this a screenshot of you having the pdf open?

> >>

> >> Shouldn't the font be embedded in the pdf?

> >>

> >> /mirko

> >>

> >>

> >> On Sun, Nov 8, 2009 at 3:13 PM, ZhangJieJing <kzjeef at gmail.com> wrote:

> >>

> >>> Hi,

> >>>

> >>> I noticed the font is not very portable, the attach is the Screenshot on

> >>> my ubuntu.

> >>>

> >>> as the screenshot show, the words ar*e crowd together.

> >>> *

> >>> ---

> >>> Best regards,

> >>> Zhang Jiejing

> >>>

> >>>

> >>>

> >>> On Sun, Nov 8, 2009 at 1:59 AM, Mirko Lindner <mirko at qi-hardware.com>wrote:

> >>>

> >>>> Hey Carlos,

> >>>>

> >>>> On Sat, Nov 7, 2009 at 3:07 PM, Carlos Camargo <cicamargoba at gmail.com>wrote:

> >>>>

> >>>>> Can you publish the source of this PDF?

> >>>>

> >>>>

> >>>> So done :) [1]

> >>>>

> >>>>

> >>>>>  We will help you :)

> >>>>>

> >>>>

> >>>> Heh, that would be nice :)

> >>>>

> >>>> /mirko

> >>>>

> >>>> [1]

> >>>> http://projects.qi-hardware.com/index.php/p/ben-nanonote/source/tree/master/

> >>>>

> >>>>

> >>>>>

> >>>>>

> >>>>> Carlos

> >>>>>

> >>>>>

> >>>>> On Sat, Nov 7, 2009 at 8:38 AM, Peter Malte Mack <

> >>>>> mack.petermalte at googlemail.com> wrote:

> >>>>>

> >>>>>> Hi,

> >>>>>>

> >>>>>> nice work - but I believe you should replace openwrt.com by

> >>>>>> openwrt.org (page 8)

> >>>>>>

> >>>>>> Peter

> >>>>>>

> >>>>>>

> >>>>>> On Sat, Nov 7, 2009 at 2:17 PM, Mirko Lindner <mirko at qi-hardware.com>wrote:

> >>>>>>

> >>>>>>> Hi,

> >>>>>>>

> >>>>>>> On Sat, Nov 7, 2009 at 1:12 PM, rakshat hooja <rakshat at gmail.com>wrote:

> >>>>>>>

> >>>>>>>>

> >>>>>>>>>>>

> >>>>>>>>>>>

> >>>>>>>>>> As ben will ship without a wifi card I would look at including USB

> >>>>>>>>>> networking and forwarding internet howto from the wiki too unless space in

> >>>>>>>>>> the manual is limited.

> >>>>>>>>>>

> >>>>>>>>>

> >>>>>>>>> Your are right. Thanks. I uploaded a new version.

> >>>>>>>>>

> >>>>>>>>> /mirko

> >>>>>>>>>

> >>>>>>>>>

> >>>>>>>>>

> >>>>>>>>>>

> >>>>>>>>>>

> >>>>>>>> Ethernet over USB at top of the page and SSH below that makes more

> >>>>>>>> sense to me. (checking ping first before SSH)

> >>>>>>>>

> >>>>>>>

> >>>>>>> I changed the outline of the HowTo's a bit. The first now describes

> >>>>>>> ethernet over USB including ssh and the second how one can forward internet

> >>>>>>> access over USB.

> >>>>>>>

> >>>>>>> /mirko

> >>>>>>>

> >>>>>>>

> >>>>>>>>

> >>>>>>>> Thanks

> >>>>>>>>

> >>>>>>>>

> >>>>>>>> Rakshat

> >>>>>>>>

> >>>>>>>> _______________________________________________

> >>>>>>>> Qi Developer Mailing List

> >>>>>>>> Mail to list (members only): developer at lists.qi-hardware.com

> >>>>>>>> Subscribe or Unsubscribe:

> >>>>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>>>>>>

> >>>>>>>

> >>>>>>>

> >>>>>>> _______________________________________________

> >>>>>>> Qi Developer Mailing List

> >>>>>>> Mail to list (members only): developer at lists.qi-hardware.com

> >>>>>>> Subscribe or Unsubscribe:

> >>>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>>>>>

> >>>>>>

> >>>>>>

> >>>>>> _______________________________________________

> >>>>>> Qi Developer Mailing List

> >>>>>> Mail to list (members only): developer at lists.qi-hardware.com

> >>>>>> Subscribe or Unsubscribe:

> >>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>>>>

> >>>>>

> >>>>>

> >>>>>

> >>>>> --

> >>>>> Carlos Iván Camargo Bareño

> >>>>> Profesor Asistente

> >>>>> Departamento de Ingeniería Eléctrica y Electrónica

> >>>>> Universidad Nacional de Colombia

> >>>>> cicamargoba at unal.edu.co

> >>>>>

> >>>>> _______________________________________________

> >>>>> Qi Developer Mailing List

> >>>>> Mail to list (members only): developer at lists.qi-hardware.com

> >>>>> Subscribe or Unsubscribe:

> >>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>>>

> >>>>

> >>>>

> >>>> _______________________________________________

> >>>> Qi Developer Mailing List

> >>>> Mail to list (members only): developer at lists.qi-hardware.com

> >>>> Subscribe or Unsubscribe:

> >>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>>

> >>>

> >>>

> >>> _______________________________________________

> >>> Qi Developer Mailing List

> >>> Mail to list (members only): developer at lists.qi-hardware.com

> >>> Subscribe or Unsubscribe:

> >>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>>

> >>

> >>

> >> _______________________________________________

> >> Qi Developer Mailing List

> >> Mail to list (members only): developer at lists.qi-hardware.com

> >> Subscribe or Unsubscribe:

> >> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >>

> >

> >

> > _______________________________________________

> > Qi Developer Mailing List

> > Mail to list (members only): developer at lists.qi-hardware.com

> > Subscribe or Unsubscribe:

> > http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

> >



> _______________________________________________

> Qi Developer Mailing List

> Mail to list (members only): developer at lists.qi-hardware.com

> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer



_______________________________________________

Qi Developer Mailing List

Mail to list (members only): developer at lists.qi-hardware.com

Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20091111/6426c072/attachment.htm>


More information about the discussion mailing list


interactive