usbboot button

Adam Wang adam at qi-hardware.com
Thu Nov 26 08:31:31 EST 2009


Hi,

On Thu, Nov 26, 2009 at 8:13 PM, Carlos Camargo <cicamargoba at gmail.com>wrote:

> Hi Xiangfu
>
> You're right about use a "push button" for the reset, but some people on
> the list think that they can use Nano in a client-server configuration, so
> you  put Nano in usb-boot.
>
> Agreed with both of your ideas, this is why we used usb boot slide switch
in avt2.

> But, we want to hear the developer's opinion about that. We are on time for
> make these changes.
>
> Only we changed into a smaller one like [1], any opinions from developers
are welcome.
Adam

[1]
http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/datasheet/SW1~MK-12C02-PB.pdf

>
> Carlos
>
>
>
> On Thu, Nov 26, 2009 at 3:58 AM, Xiangfu Liu <xiangfu at qi-hardware.com>wrote:
>
>> Hi Adam Carlos
>>
>> I just think the USBBOOT mode switch. how about USBBOOT switch same as
>> [reset],
>> just a little hole at the back of device. we don't need always stay at
>> USBBOOT mode,
>>
>> when boot to USBBOOT mode. first press USBBOOT hole. then press the reset
>> hole.
>> after reflash. press the reset again.
>>
>>
>>
>> --
>> Xiangfu Liu
>> Email: xiangfu at qi-hardware dot com
>> Web: http://www.qi-hardware.com
>>
>>
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer at lists.qi-hardware.com
>> Subscribe or Unsubscribe:
>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>>
>
>
>
> --
> Carlos Iván Camargo Bareño
> Profesor Asistente
> Departamento de Ingeniería Eléctrica y Electrónica
> Universidad Nacional de Colombia
> cicamargoba at unal.edu.co
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20091126/a50cbcd6/attachment.htm>


More information about the discussion mailing list


interactive