can you adjust the volume to 0?

Carlos Camargo cicamargoba at gmail.com
Thu Oct 15 07:46:33 EDT 2009


I'm using mplayer, on new Qi_AVT2 and the volume control works fine

Carlos


On Thu, Oct 15, 2009 at 3:30 AM, Yi Zhang <yi at qi-hardware.com> wrote:

> On our 19 new samples, we have production testing software from our vendor.
> One of the test cases is volume, and I was able to decrease the volume from
> lever 7 to 0 gradually. I would imagine gradually decreasing volume is
> achievable with software.
>
> Yi
>
> On 2009-10-14, at 下午7:14, Lars-Peter Clausen wrote:
>
>  -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> ZhangJieJing wrote:
>>
>>> I think the volume driver still not tested. maybe not work. ---
>>> Best regards, Zhang Jiejing
>>>
>>>
>>> On Wed, Oct 14, 2009 at 1:09 AM, Xiangfu Liu <xiangfu.z at gmail.com>
>>> wrote:
>>>
>>>  Hi Lars
>>>>
>>>> in my board. use alsamixer change the volume not work. it's
>>>> always very loud.
>>>>
>>>> 1. add the alsa alsa-utils to rootfs. add mpc/mpd to rootfs 2. as
>>>> you said turn the DAC on 3. put ogg file to ~/music 4. change
>>>> /etc/mpd.conf file uncomment music db lines 5. mpd --create-db 6.
>>>> mpc listall | mpc add 7. mpc play
>>>>
>>>> there is music. but when I use alsamixer adjust the volume. not
>>>> work. always 100% I think. did I do something wrong?
>>>>
>>>> thanks for help
>>>>
>>> The hardware has only for levels of volume which all of the are still
>> quite loud. if you want to mute the speaker you should toggle the
>> volume switch. (Press M in alsamixer)
>>
>> - -Lars
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.9 (GNU/Linux)
>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>>
>> iEYEARECAAYFAkrVsngACgkQBX4mSR26RiOOWwCcDrPXXYrj0UQh1soOunV7S71A
>> NGsAnRfz10gqo26epjraEiT1DdnTxPhP
>> =8Las
>> -----END PGP SIGNATURE-----
>>
>>
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer at lists.qi-hardware.com
>> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/
>> mailman/listinfo/developer
>>
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>



-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20091015/f2be75d0/attachment.htm>


More information about the discussion mailing list


interactive