flashing problem

rakshat hooja rakshat at gmail.com
Tue Oct 27 15:27:07 EDT 2009


i was using the script given on the wiki. does it on longer work? can
you also give the commands for flashing kernel and boot loader. thanks


On 10/28/09, Xiangfu Liu <xiangfu at qi-hardware.com> wrote:
> rakshat hooja wrote:
>> When I try to usb flash my new ben nenonote I get the following error.
>> It seems to be in usb boot mode as per the instructions on the wiki. or
>> is it not in usb boot mode? Please advise
>>
>> --
>> usbboot - Ingenic XBurst USB Boot Utility
>> (c) 2009 Ingenic Semiconductor Inc., Qi Hardware Inc., Xiangfu Liu,
>> Marek Lindner
>> This program is Free Software and comes with ABSOLUTELY NO WARRANTY.
>>
>> Now checking whether all configure args valid: YES
>> Current device information:
>> CPU type is Ingenic XBurst Jz4740
>> Crystal work at 12MHz, the CCLK up to 252MHz and PMH_CLK up to 84MHz
>> SDRAM Total size is 32 MB, work in 4 bank and 16 bit mode
>> Nand page per block 128, Nand page size 4096, ECC offset in OOB 12, bad
>> block offset in OOB 0, bad block page 127, use 1 plane mode
>>  Execute command: nprog 2048 openwrt-xburst-root.jffs2-512k 0 0 -n
>>  Programing No.0 device, flen 4325376, start page 2048...
>>  CPU data: JZ4740V1
>>  Device unboot! Boot it first!
>>
> Hi
> what command you use?
> for flash the rootfs you should use:
>
> sudo usbboot -c "boot;nprog 2048 openwrt-xburst-root.jffs2-512k 0 0 -n"
> "boot" -- for boot the Ben NanoNote
> "nprog" -- nand program, flash the file to nand.
>
>
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>


-- 
--------------
Please use Firefox as your web browser. Its protects you from spyware
and is also a very feature rich browser.
www.firefox.com




More information about the discussion mailing list


interactive