Pcb secifications

Adam Wang adam at qi-hardware.com
Sat Sep 5 01:49:24 EDT 2009


Hi Carlos,

The all the requirements of qi_avt2 I uploaded to
[1] for pcb file, [2] for jz4720 COB fingers, [3] for gerber file
Since those can be openned by PADS, there're having more detail things you
can get. Also includes drill, etc.
Thanks,
Adam

[1] http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/pcb/
[2] http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/pcb/cob/
[3] http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/gerber/

On Sat, Sep 5, 2009 at 11:57 AM, Carlos Camargo <cicamargoba at gmail.com>wrote:

> Hi Adam
>
> Can you send me the board specs? I mean: Min trace width, annular ring,
> number of layers, via drill, etc, etc, We want to start the routing process,
> and we need this information.
>
> Thanks
>
> Carlos
>
>
> --
> Carlos Iván Camargo Bareño
> Profesor Asistente
> Departamento de Ingeniería Eléctrica y Electrónica
> Universidad Nacional de Colombia
> cicamargoba at unal.edu.co
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20090905/535ad228/attachment.htm>


More information about the discussion mailing list


interactive