How to Reflash Ben NanoNote

Xiangfu Liu xiangfu at qi-hardware.com
Wed Sep 9 10:23:43 EDT 2009


Hi 
  we will put the recently image at [1], 
for the 2GB board. you need download those four files: 
openwrt-xburst-root.jffs2-512k
openwrt-xburst-u-boot.bin
openwrt-xburst-uImage.bin
reflash_ben.sh

put those four files in same folder
boot the board to USB_BOOT mode.
run "sh reflash_ben.sh" to reflash the device.
after that. just reboot your Ben. 
you will see 
"Please press Enter to activate this console." 
on the screen.

when you reflash the device, the first boot, 
kernel need about 3~5 minutes to erase the nand that rootfs not use.
after first time. it's will work fine. 
the boot time is around ~10 secs.



[1] http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/





More information about the discussion mailing list


interactive