How to Reflash Ben NanoNote

Xiangfu Liu xiangfu.z at gmail.com
Wed Sep 9 11:21:33 EDT 2009


Hi
 here is the USB_BOOT host tools:
http://downloads.qi-hardware.com/software/xburst-tools/
the configure is at /etc/xburst-tools/
by default the usbboot.cfg is for 2GB nand board.


Xiangfu Liu wrote:
> Hi 
>   we will put the recently image at [1], 
> for the 2GB board. you need download those four files: 
> openwrt-xburst-root.jffs2-512k
> openwrt-xburst-u-boot.bin
> openwrt-xburst-uImage.bin
> reflash_ben.sh
> 
> put those four files in same folder
> boot the board to USB_BOOT mode.
> run "sh reflash_ben.sh" to reflash the device.
> after that. just reboot your Ben. 
> you will see 
> "Please press Enter to activate this console." 
> on the screen.
> 
> when you reflash the device, the first boot, 
> kernel need about 3~5 minutes to erase the nand that rootfs not use.
> after first time. it's will work fine. 
> the boot time is around ~10 secs.
> 
> 
> 
> [1] http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/
> 
> 
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer


-- 
Xiangfu Liu
Email: xiangfu at qi-hardware dot com
Web: http://www.qi-hardware.com




More information about the discussion mailing list


interactive