How to Reflash Ben NanoNote

ZhangJieJing kzjeef at gmail.com
Wed Sep 9 11:32:53 EDT 2009


Hi, all

should we post these paper to wiki ?


---
Best regards,
Zhang Jiejing


On Wed, Sep 9, 2009 at 10:23 PM, Xiangfu Liu <xiangfu at qi-hardware.com>wrote:

> Hi
>  we will put the recently image at [1],
> for the 2GB board. you need download those four files:
> openwrt-xburst-root.jffs2-512k
> openwrt-xburst-u-boot.bin
> openwrt-xburst-uImage.bin
> reflash_ben.sh
>
> put those four files in same folder
> boot the board to USB_BOOT mode.
> run "sh reflash_ben.sh" to reflash the device.
> after that. just reboot your Ben.
> you will see
> "Please press Enter to activate this console."
> on the screen.
>
> when you reflash the device, the first boot,
> kernel need about 3~5 minutes to erase the nand that rootfs not use.
> after first time. it's will work fine.
> the boot time is around ~10 secs.
>
>
>
> [1]
> http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20090909/d9cd498d/attachment.htm>


More information about the discussion mailing list


interactive