How to Reflash Ben NanoNote

Xiangfu Liu xiangfu at qi-hardware.com
Wed Sep 9 11:38:56 EDT 2009


ZhangJieJing wrote:
> Hi, all
> 
> should we post these paper to wiki ? 
yes. already work on that.
http://wiki.qi-hardware.com/index.php/How_to_reflash

feel free to edit it. make it more clear.
> 
> 
> ---
> Best regards,
> Zhang Jiejing
> 
> 
> On Wed, Sep 9, 2009 at 10:23 PM, Xiangfu Liu <xiangfu at qi-hardware.com
> <mailto:xiangfu at qi-hardware.com>> wrote:
> 
>     Hi
>      we will put the recently image at [1],
>     for the 2GB board. you need download those four files:
>     openwrt-xburst-root.jffs2-512k
>     openwrt-xburst-u-boot.bin
>     openwrt-xburst-uImage.bin
>     reflash_ben.sh
> 
>     put those four files in same folder
>     boot the board to USB_BOOT mode.
>     run "sh reflash_ben.sh" to reflash the device.
>     after that. just reboot your Ben.
>     you will see
>     "Please press Enter to activate this console."
>     on the screen.
> 
>     when you reflash the device, the first boot,
>     kernel need about 3~5 minutes to erase the nand that rootfs not use.
>     after first time. it's will work fine.
>     the boot time is around ~10 secs.
> 
> 
> 
>     [1]
>     http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/
> 
> 
>     _______________________________________________
>     Qi Developer Mailing List
>     Mail to list (members only): developer at lists.qi-hardware.com
>     <mailto:developer at lists.qi-hardware.com>
>     Subscribe or Unsubscribe:
>     http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer





More information about the discussion mailing list


interactive