qi_avt2 v1.0 board status
Adam Wang
adam at qi-hardware.com
Sun Sep 13 11:20:09 EDT 2009
Hi Carlos,
Carlos Camargo wrote:
> hi adam, good job. i want one new board :).
I'll tell list that test results after verification.
> when finish all tests, please check the kicad brd file. we want that
> the next board will be designed in kicad.
Yeah, next board should be used in kicad. :-)
> We've already uploaded pcb and footprints files, all components
> placed, and remove a lot of test-points
>
> Can you please check if the placement and size are right ?
>
Next week the procesess will be kept cob and manual soldering for safe
reason, i want test boards before gluing;
so will spend time to check all size after maybe next week later. sorry
for this.
Adam
> Best Regards
>
>
> Carlos
>
> On Sun, Sep 13, 2009 at 3:52 AM, Adam Wang <adam at qi-hardware.com
> <mailto:adam at qi-hardware.com>> wrote:
>
> Hi All,
>
> The picture of avt2_v1.0 board with die is here[1].
> And it just works and shown up[2].
> I'll keep do more basic IO tests.
> Adam
>
> [1]
> http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/smt/pictures/top_jz4720.jpg
> [2]
> http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/report/photos/avt2_v1.0_works.JPG
>
>
>
> Adam Wang wrote:
>
> Hi All,
>
> We're now on the process to produce small run of avt2 board,
> here is the top side of avt2 without jz4720 temporarily;
> http://downloads.qi-hardware.com/hardware/qi_avt2/v1.0/smt/pictures/top.jpg
>
> Will keep you posted later.
> Adam
>
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> <mailto:developer at lists.qi-hardware.com>
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>
>
>
>
> --
> Carlos Iván Camargo Bareño
> Profesor Asistente
> Departamento de Ingeniería Eléctrica y Electrónica
> Universidad Nacional de Colombia
> cicamargoba at unal.edu.co <mailto:cicamargoba at unal.edu.co>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20090913/df1eee82/attachment.htm>
More information about the discussion
mailing list