Help with working with ttyS1

Xiangfu Liu xiangfu at sharism.cc
Thu Apr 22 21:34:59 EDT 2010


Hi David

then press S+Power the u-boot will enable the ttyS0. and wait 3 seconds(in old u-boot, it's 5 secs)
form the serial input.
   if nothing input: u-boot will boot the kernel.
   if something input: u-boot will goto u-boot's console.

problem is the RXD pin will generate some garbage character when the serial console is not connect to PC.
so when not connect the ttyS1 with PC. the u-boot will stop at u-boot's console.


On 04/21/2010 11:23 PM, David Reyes Samblas Martinez wrote:
>   by the way Xiang , with u-boot provided if I press S+Power serial
> returs this in ttyS0





More information about the discussion mailing list


interactive