u-boot, kernel and rootfs

Mirko Lindner mirko at sharism.cc
Wed Apr 28 08:23:58 EDT 2010


Hey,

On Wed, Apr 28, 2010 at 1:58 PM, Carlos Camargo <cicamargoba at gmail.com>wrote:

> Hi
>
> Can you include a configuration for SAKC?
>

If it's up to me that's a yes :) I am sure Mirko V. won't mind building
stuff for SAKC also.

/mirko


> we've alredy upload some files for u-boot and linux kernel, both platforms
> are very similar, on sakc we have the I2C port available, but we can use the
> Ingenic's kernel drivers
>
>
> Best Regards
>
>
>
> Carlos
>
>
> On Wed, Apr 21, 2010 at 3:31 AM, Mirko Lindner <mirko at sharism.cc> wrote:
>
>> Hey all,
>>
>> We have followed the discussions taking place on the mailinglists and the
>> issues raised in the mails regarding the images.
>>
>> In our software call yesterday we came up with the following proposal on
>> how we can improve the flexibility.
>> We would go about and start creating different flavors of various bits and
>> pieces.
>>
>> u-boot:
>> We would create u-boot in two flavors:
>> - one logging to the console rather than the serial console
>> - one for the avt2 boards
>>
>> kernels:
>> Three kernel flavors:
>> - our standard kernel
>> - the standard kernel without the splash image
>> - one targeted at a debian rootfs; standard + fpu + inotify + with
>> different partition sizes (due to the size of debian :) )
>>
>> rootfs:
>> Two flavors
>> - our standard rootfs
>> - a barebone rootfs, which will only have the absolutely necessary
>> programs installed (no gmenu2x, no qt etc etc)
>>
>> What do you think?
>>
>> Input very welcome.
>>
>> Regards,
>>
>> /mirko
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer at lists.qi-hardware.com
>> Subscribe or Unsubscribe:
>> http://en.qi-hardware.com/mailman/listinfo/developer
>>
>
>
>
> --
> Carlos Iván Camargo Bareño
> Profesor Asistente
> Departamento de Ingeniería Eléctrica y Electrónica
> Universidad Nacional de Colombia
> cicamargoba at unal.edu.co
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://en.qi-hardware.com/mailman/listinfo/developer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20100428/89455cb4/attachment.htm>


More information about the discussion mailing list


interactive