Finding 3.3v on the board

David Reyes Samblas Martinez david at tuxbrain.com
Sat Apr 10 02:12:13 EDT 2010


 Guylhem , take a look at this[1]

[1]http://en.qi-hardware.com/wiki/Serial_console#Hardware_mod_to_have_a_pluggable_serial_port
2010/4/10 Guylhem Aznar <nanonote at guylhem.net>:
> Hello
>
> I'd like to get 3.3v from the motherboard, when the nanonote is on (ie
> get nothing when powered off) to hook a bluetooth module to RX/TX.
> Any suggestion before I cut open the plastic sheet behind the battery
> and look with a multimeter?
>
> Thanks
> Guylhem
>
> _______________________________________________
> discussion mailing list
> discussion at lists.qi-hardware.com
> http://en.qi-hardware.com/mailman/listinfo/discussion
>



-- 
David Reyes Samblas Martinez
http://www.tuxbrain.com
Open ultraportable & embedded solutions
Ben NanoNote, Arduino, Openmoko
Hey, watch out!!! There's a linux in your pocket!!!




More information about the discussion mailing list


interactive