KiCad - what to commit to revision control, and what not to commit

Ron K. Jeffries rjeffries at gmail.com
Sun Aug 22 13:27:41 EDT 2010


Werner,

What can you tell us about the Ben-WPAN board?
---
Ron K. Jeffries









On Sun, Aug 22, 2010 at 10:24, Werner Almesberger <werner at openmoko.org>wrote:

> Wolfgang Spraul wrote:
> > That's it, hopefully accurate, if not please share what you know.
> > Other KiCad extensions I have seen before were .pho .erc .drl .cmp,
> > .pos, .rpt, .stf, .cache (instead of -cache), .fpd
>
> .pho    Gerber
> .erc    ERC report
> .drl    Drill file ?
> .cmp    Footprint assignment (when done in cvpcb)
> .pos    Component placement ?
> .rpt    DRC report
> .stf    dunno
> .cache  dunno
> .fpd    Fped footprint definition ;-)
>
> > BTW - we have 5 KiCad projects right now: AVT2, Xu?, ben-wpan, SIE,
> > mmone-jtag-serial-cable. No success stories yet,
>
> What would it take for such a project to be "successful" ? ben-wpan
> and also IDBG (half of whose firmware is now in f32xbase) have
> produced working boards. The PCBs were made with toner transfer from
> Postscript (Gerbers not used, no silk screen, no solder mask, no
> printed solder paste) and with manual pick and place.
>
> - Werner
>
> _______________________________________________
> Qi Hardware Discussion List
> Mail to list (members only): discussion at lists.en.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.en.qi-hardware.com/mailman/listinfo/discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20100822/e940bf4c/attachment.htm>


More information about the discussion mailing list


interactive