New Ben Nanonote Case (Castle)

Carlos Camargo cicamargoba at gmail.com
Mon Dec 6 09:58:57 EST 2010


I prefer read notes about SW and HW development, I miss the developer list.


Carlos


On Mon, Dec 6, 2010 at 8:51 AM, Xiangfu Liu <xiangfu at sharism.cc> wrote:

> On 12/06/2010 11:04 AM, Jane Andreas wrote:
> > Hello everyone,
> >
> > it has been a while, but I have devised a new crochet case for the Ben
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-full-strap.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-open.jpg
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-closed.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-angle.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-back-button.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-angle-workstation.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-worn01.JPG
> >
> > http://en.qi-hardware.com/wiki/File:Castle-case-worn02.jpg
> >
> > I call this release of the case "castle" because of the look when flap is
> open.
>
> Nice.
>
> >
> >
> > additions include:
> >
> > decorative edgings
> > adjustable strap (not suitable for running with yet though, just walking)
> > 4-color scheme
> >
> >
> > I am interested in making people custom order cases. If anyone wants one,
> let me know (perhaps I will have to use another channel, not the main
> mailing list? )
>
> this mailing list is fine, since it's "English Qi Hardware mailing list -
> support, developers, use cases and fun". :)
>
> > A case would be 7.95 USD regardless of customization options.
> >
> > I will be reworking the strap and using real buttons in future versions
> (currently buttons are made of yarn.
> >
> > I will try to give "source code " for the current pattern if anyone wants
> to try to make a case
> >
> > body:
> >
> > chain as many as your device is wide (in my case it was 15 for Ben
> Nanonote, case can be adapted for any device)
> > chain an additional 2
> > hdc in 3rd chain from hook and each chain remaining
> > when you get to last ch, turn and work hdc into OTHER side of chain
> > slip stitch to ch-2 from beggining
> > repeat rounds of hdc until case is as tall as you want
> > finish off;weave in ends (2)
> >
> > strap
> >
> > attach yarn to edge of case where you want
> > ch 3 (counts as dc)
> > dc in next 4 stitches (5 total)
> > ch 3, turn, dc in next 4 dc (repeat until strap is desired length)
> > finish off
> >
> > button(S)
> > ch2
> > 6 sc in 2nd chain from hook
> > 6sc in same chain to overlap first 6 sc
> > finish off
> >
> > obviously this is not all the info you need, but I will release more when
> I have time.
> >
> > full pattern (when released) will always be free as in free speech. Of
> course one could "reverse engineer" a case too.
> >
> > -hack well, take care
> >
> >
> >
> >
> > _______________________________________________
> > Qi Hardware Discussion List
> > Mail to list (members only): discussion at lists.en.qi-hardware.com
> > Subscribe or Unsubscribe:
> http://lists.en.qi-hardware.com/mailman/listinfo/discussion
>
>
> --
> Best Regards
> Xiangfu
> -- Qi RSS feed, http://en.qi-hardware.com/feed/rss20.xml --
>
> _______________________________________________
> Qi Hardware Discussion List
> Mail to list (members only): discussion at lists.en.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.en.qi-hardware.com/mailman/listinfo/discussion
>



-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20101206/5adb4ffb/attachment.htm>


More information about the discussion mailing list


interactive