Milkymist One RC2 run report

David Reyes Samblas Martinez david at
Wed Dec 15 04:47:01 EST 2010

I have mentioned 4 the first time I saw the first schematics when
wolfgang visits me... :)

2010/12/15 Adam Wang <adam at>:
> Hi,
> We've just finished the run as title, you can check:
> The overall of this RC2 run, please check:
> The issues discovered during production also recorded:
> The majority of err about cannot boot, we've still not fully understood yet.
> I made two mistakes on BoM value which let VGA DDC failed and R30/R39
> swapped. You can check it out. Now for all of those batches I fixed back.
> The Y2 Xtal for video chip I just requested samples from the same type of
> Y1, later I'll test this.
> Most of this run we have productive items needed to improve:
> 1, checking incoming parts' mark/pins
> 2, good results of AOI and visual inspection
> 3, well-defined on audio test environment built
> 4, use a Y Pb Pr component video in signals rather than one composite PAL
> video in
> 5, fast flashing
> I just roughly mentioned them above, if you think it's not enough, just
> replenish.
> Thanks,
> Adam
> _______________________________________________
> Qi Hardware Discussion List
> Mail to list (members only): discussion at
> Subscribe or Unsubscribe:

David Reyes Samblas Martinez
Open ultraportable & embedded solutions
Ben NanoNote, Arduino, Openmoko
Hey, watch out!!! There's a linux in your pocket!!!

More information about the discussion mailing list