Hello, and questions

Carlos Camargo cicamargoba at gmail.com
Thu Feb 18 16:32:27 EST 2010


je je
please don't misunderstand me Jose, of course the main goal of this
project is spread the free software and hardware philosophy, and we
need solve all kind of questions, but, if we have a dedicated list for
user we can build a good database for common problems.

Welcome to our community

Carlos

On 2/18/10, David Reyes Samblas Martinez <david at tuxbrain.com> wrote:
> Hi Jose :)
> (Carlos meanwhile there is no userlist let me answer here :P)
> I remember this happens to me to, and finally we have solved whipping
> out whole nand and starting over.
> Here is the command line sequence:
> sudo usbboot -c "boot;nerase 0 4096 0 0"
> sudo usbboot -c "nprog 0 openwrt-xburst-u-boot.bin 0 0 -n"
> sudo usbboot -c "nprog 1024 openwrt-xburst-uImage.bin 0 0 -n"
> sudo usbboot -c "nprog 1024 openwrt-xburst-uImage.bin 0 0 -n"
> This way will work for sure
> but it's no recomended to use it as usual to your nand health.
>
> Regards
> David
> 2010/2/18 Jose E. Marchesi <jemarch at gnu.org>:
>> Hi.
>>
>> I just got my Ben Nanonote from the Tuxbrain guys (thank you :)).  The
>> machine came flashed with the latest image available from qi-hardware.
>> Alsa is not working in that image, so I wanted to switch to 2010-01-13
>> instead.
>>
>> I followed the instructions on how to flash the machine using the
>> reflash_ben.sh script.  Everything was ok.  After I got the "done" from
>> the script I connected the battery again and tried to boot the new system,
>> but the system got frozen in the Open WRT splash screen... for more than
>> 15 minutes.  Then I switched off the machine by removing the battery.  I
>> was not able to boot the new image.
>>
>> Questions:
>>
>> - The first boot after flashing the machine is expected to be slow but,
>> more than 15 minutes?
>>
>> - How can I disable the splash screen?
>>
>> Thanks :)
>>
>>
>>
>>
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer at lists.qi-hardware.com
>> Subscribe or Unsubscribe:
>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>>
>
>
>
> --
> David Reyes Samblas Martinez
> http://www.tuxbrain.com
> Open ultraportable & embedded solutions
> Ben NanoNote, Arduino, Openmoko
> Hey, watch out!!! There's a linux in your pocket!!!
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>


-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co




More information about the discussion mailing list


interactive