Hello, and questions

jemarch at gnu.org jemarch at gnu.org
Thu Feb 18 16:33:29 EST 2010


Hi.
   sudo usbboot -c "boot;nerase 0 4096 0 0"
   sudo usbboot -c "nprog 0 openwrt-xburst-u-boot.bin 0 0 -n"

I am now getting errors while writing to the NAND:

usbboot :> nprog 0 openwrt-xburst-u-boot.bin 0 0 -n
 Programing No.0 device, flen 450628, start page 0...
 CPU data: Boot4740
 Erasing No.0 device No.0 flash (start_blk 0 blk_num 1)......
 Finish! Return: 80 00 00 00 00 00 00 00 (position 1)
 There are marked bad blocks: 0
 Size to send 450628, transfer_size 524288
 Image type : without oob
 It will cause 1 times buffer transfer.
 Writing NAND page 0 len 454656...
 CPU data: Boot4740
 Finish! (len 454656 start_page 0 page_num 111)
Error - can't read bulk data from Ingenic device:5312
 Checking 454656 bytes... no check! End at Page: 610467841
 Skip a old bad block !

-- 
Jose E. Marchesi  <jemarch at gnu.org>
                  http://www.jemarch.net
GNU Project       http://www.gnu.org




More information about the discussion mailing list


interactive