Hello, and questions

jemarch at gnu.org jemarch at gnu.org
Thu Feb 18 16:51:38 EST 2010


   I am now getting errors while writing to the NAND:

   usbboot :> nprog 0 openwrt-xburst-u-boot.bin 0 0 -n
    Programing No.0 device, flen 450628, start page 0...
    CPU data: Boot4740
    Erasing No.0 device No.0 flash (start_blk 0 blk_num 1)......
    Finish! Return: 80 00 00 00 00 00 00 00 (position 1)
    There are marked bad blocks: 0
    Size to send 450628, transfer_size 524288
    Image type : without oob
    It will cause 1 times buffer transfer.
    Writing NAND page 0 len 454656...
    CPU data: Boot4740
    Finish! (len 454656 start_page 0 page_num 111)
   Error - can't read bulk data from Ingenic device:5312
    Checking 454656 bytes... no check! End at Page: 610467841
    Skip a old bad block !

Fixed. I was using a USB hub.  If I connect the USB directly to the
computer it works fine... weird :)

--
Jose E. Marchesi  <jemarch at gnu.org>
                  http://www.jemarch.net
GNU Project       http://www.gnu.org






More information about the discussion mailing list


interactive