My Walkthrough [Part 3 - Setup Kicad for Ben NanoNote]

Carlos Camargo cicamargoba at gmail.com
Sun Feb 21 17:54:42 EST 2010


hi Kevyn

you can download the kicad design files on projects -> Hardware design AVT2 [1]


[1] http://projects.qi-hardware.com/index.php/p/board-qi-avt2/source/tree/master/


Carlos

On 2/21/10, Kevyn-Alexandre Paré <kevyn.alexandre.pare at gmail.com> wrote:
> Hi,
>
> I'm interested in setup my environment to look at the HW stuff and try
> to understand more of it. More about how kicad help to develop and how
> the development process of hardware is working. Since I have a
> software background and I'm really interested to understand more about
> the HW design and it integration with the software.
>
> So I'm on Ubuntu 9.10 and found that the kicad installation is really
> straight forward:
> kapare at vostro:~/qi-hardware$ sudo apt-get install kicad
> kapare at vostro:~/qi-hardware$ uname -a
> Linux vostro 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC
> 2010 i686 GNU/Linux
>
> So after that I'm a bit lost on where to go in the wiki to found the
> schematic, gerber, etc...
> qi-hardware.com
>
> Maybe in the source tree???
>
> To be continued
>
> Best Regards and success to all
>
> Kevyn-Alex
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://en.qi-hardware.com/mailman/listinfo/developer
>


-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co




More information about the discussion mailing list


interactive