[pcb maker]

Atommann atommann at gmail.com
Tue Jan 12 02:15:57 EST 2010


Hi all,

2010/1/12 Adam Wang <adam at sharism.cc>:
> Hi,
>
> Is there anyone knows pcb maker with 3.5 mils drill hole and under 3 mils
> trace and space?

3.5 mils drill is so small! 0.0254mm/mil * 3.5 mil = 0.0889mm
Maybe the following pcb house can meet the requirements:
Shenzhen shennan Electronics co.,ltd.
The specifications can be found in this page: http://www.zwpcb.cn/zc.asp

> Although I can find easily here Taipei, but most of them are not familiar
> with KiCad. So our goal is to find a maker who really knows KiCad as well
> , even the gerber files are accepted with RS-274X format.
>

I think the RS-274X format will be OK.

> These days I tried to find and got info from two pcb makers:
> 1, [1] GoldPhonenixpcb with 8 mils drill hole capability
> 2, [2] BatchPCB with 6mil min spacing /trace and 13mil (~0.33 mm) drill size
>
> Above two vendors are having cooperate with Sparkfun also knows Kicad. But
> they still not meet our requirments.
> So if you know anyone pcb makers with our spec, please let us know. Thanks,
> Adam
> [1] http://www.goldphoenixpcb.biz/
> [2] http://www.batchpcb.com/index.php/Home
>

-- 
Best regards,
Atommann




More information about the discussion mailing list


interactive