new images and important changes

Wolfgang Spraul wolfgang at sharism.cc
Thu Jan 14 07:30:31 EST 2010


Mirko,
beautiful all sounds very good! Congratulations and a big THANK YOU to you
and the whole team that helped!
I think the priorities are correct, if others feel priorities should be
different please speak up. Solid foundation first.
Nice! :-)
Wolfgang

On Thu, Jan 14, 2010 at 12:15:19PM +0100, Mirko Vogt wrote:
> Hey hackers,
> 
> it took a while, however there were many things to do and fix - anyway:
> new images are uploaded![1] :)
> 
> a rough overview what happened:
> 
> 
> - the IP-address for reaching the Ben via the usb-network bridge was
> changed due to collisions and is now: 192.168.254.101/24
> 
> - this and successive images will use the whole NAND and therefore the
> full amount of 2GB internal storage - however this increases the mount-
> and so the startup time a bit
> 
> - due to the gorgeous work of Javi and Lars there is now partial support
> for the spectec WiFi microSDIO-card (ks7010 chipset)
> 
> - the kernel module subsystem got fixed - kernel modules can now be
> built/loaded/unloaded as usual
> 
> - the xburst-target got committed into the OpenWrt-repository and is now
> part of the OpenWrt project - however, for now main-developement will
> still happen within the well-known git-repository managed on
> projects.qi-hardware.com
> 
> - pressing key 'u' while powering up the NanoNote puts the device into
> usbboot-mode from which the NAND may get programmed - no need anymore to
> shortcut the usbboot-pins once uboot exists
> 
> - linux kernel got leveled up to version 2.6.32
> 
> 
> Happy hacking! :)
> 
> mirko
> 
> 
> 
> [1]http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND 
> 
> 
> 
> -- 
> This email address is used for mailinglist purposes only.
> Non-mailinglist emails will be dropped automatically.
> If you want to get in contact with me personally, please mail to:
> mirko.vogt <at> nanl <dot> de
> 
> 
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer




More information about the discussion mailing list


interactive