SAKC board

Carlos Camargo cicamargoba at gmail.com
Sat Jan 16 22:23:47 EST 2010


I forgot the references :)


[1] http://www.vernier.com/
[2] http://wiki.laptop.org/go/Turtle_Art


Carlos


On Sat, Jan 16, 2010 at 10:06 PM, Carlos Camargo <cicamargoba at gmail.com>wrote:

> Hi Bas
>
>
> Thanks a lot for your reply.
>
> I'm teacher too (Digital system Design)
>
> And I want to use SAKC board with Nano for make a device like [1], of
> course we will provide current sensor, and analog inputs, The main goal of
> this project is build an analog interface for Nano.
>
>
>> The point here is that while most physics teachers like technical stuff,
>> many are not programmers.  Using the things should not require much
>> learning for non-programmers.  The learning part should be about what is
>> observed, not how to get the measurement running. ;-)
>>
>>
> I agree, because of that I like turtle-art [2] I want to use a similar
> interface for this board, so any people can use this platform, Is very
> important have a good Hardware abstraction layer, and provide many examples
>
> Anyway, as I write below, I think it makes sense to combine it with a
>> NanoNote.  To keep the combination cheap enough may be slightly harder.
>>
>>
> Another advantage of our solution is the flexibility, many commercial
>  products require special (and expensive) hardware, with our platform you
> can use your own hardware.
>
>
> Bas can you add all of your recommendations on wiki? Your comments are very
> valuables for us.
>
> Best regards
>
>
> Carlos
>
> --
> Carlos Iván Camargo Bareño
> Profesor Asistente
> Departamento de Ingeniería Eléctrica y Electrónica
> Universidad Nacional de Colombia
> cicamargoba at unal.edu.co
>



-- 
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba at unal.edu.co
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.en.qi-hardware.com/pipermail/discussion/attachments/20100116/577b13fd/attachment.htm>


More information about the discussion mailing list


interactive