the ks7010 wifi card not work in my NanoNote

David Reyes Samblas Martinez david at tuxbrain.com
Fri Jan 22 14:26:56 EST 2010


not working here :(
copied the files  in /lib/firmware
when inserting wifi, dmesg reports:
[  470.970000] mmc0: host doesn't support card's voltages
[  470.970000] mmc0: error -22 whilst initialising SDIO card
[  473.400000] mmc0: error -145 whilst initialising SDIO card

I try to insmod ks7010 but:

insmod: /lib/modules/2.6.32.3-gd825628-dirty: No such file or directory

so I have created a link to /lib/modules/2.6.32.3 (the only existing
dir in /lib/modules) but  when i try insmod ks7010:

insmod: can't insert 'ks7010': invalid module format
and dmesg reports:
[ 1185.580000] ks7010: version magic '2.6.32.3-ge8b36f9 preempt
mod_unload MIPS32_R1 32BIT ' should be '2.6.32.3-gd825628-dirty
preempt mod_unload MIPS32_R1 32BIT '

 seems than kernel and  modules are from different version


2010/1/22 Xiangfu Liu <xiangfu at sharism.cc>:
> Hi
> I am uploading the new kernel image to .../people/xiangfu. in the new kernel
> ks7010 work fine
> here[1] is the tarball. in this file there are two files name ks7010sd.rom
> and ks79xx.cfg,
> copy those two file to Nanonote's "/lib/firmware"
>
> |-- Firmware
> |   `-- ks7010sd.rom
> |-- GPL
> |   `-- Src
> |       `-- sdio
> |           `-- ks79xx.cfg
>
> I will try to make a wiki pages about this :-)
>
> [1]http://downloads.qi-hardware.com/software/ks7010_sdio_v007.tar.bz2
>
> David Reyes Samblas Martinez wrote:
>>
>> Is this patch already in the
>> http://downloads.qi-hardware.com/people/xiangfu/ kernel?
>>
>> I have just recieved my wifi card and I'm anxious to make it work ;)
>>
>> also will be helpful to have a link to the famouse renesas tarball
>>
>> Can you smell it??? is a new tuxbran blog post/qi-hardaware wikipage
>> coming!!
>>
>> 2010/1/19 Xiangfu Liu <xiangfu at sharism.cc>:
>>>
>>> Hi
>>> in nanonote kernel. the FW_LOADER is not enable. what why alwasy give me
>>> error.
>>> have fix and commit to openwrt-xburst.
>>>
>>> attach is the patch.
>>>
>>>
>>> Lars-Peter Clausen wrote:
>>>>
>>>> Oh, yes. You need ks79xx.cfg and rom.bin from the renesas tarball in
>>>> /lib/firmware.
>>>>
>>>> We should probably had those to the package.
>>>
>>> agree.
>>>
>>> _______________________________________________
>>> Qi Developer Mailing List
>>> Mail to list (members only): developer at lists.qi-hardware.com
>>> Subscribe or Unsubscribe:
>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>>>
>>
>>
>>
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer at lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>



-- 
David Reyes Samblas Martinez
http://www.tuxbrain.com
Open ultraportable & embedded solutions
Ben NanoNote, Arduino, Openmoko
Hey, watch out!!! There's a linux in your pocket!!!




More information about the discussion mailing list


interactive