NanoNote bricked by reflash

Oleg Sadov sadov at linux-ink.ru
Thu Jul 8 13:12:43 EDT 2010


08/07/2010 18:20 +0200, Kristoffer Ericson wrote:
> On Thu, Jul 08, 2010 at 07:53:36PM +0400, Oleg Sadov wrote:
> > 08/07/2010 14:54 +0000, Wolfgang Spraul wrote:
> > > Oleg,
> > > 
> > > > No, I don't have this one near at hand at this moment -- I used the
> > > > metal connectors. 
> > > 
> > > Unless you know what you are doing, please be careful with metal connectors.
> > > Most likely holding a knife or other kitchen utensil there won't work :-)
> > 
> > Sure ;)))
> > 
> > > If you cannot find the carbonized rubber button, email me your shipping
> > > address and we'll mail you a replacement one in regular mail...
> > 
> > Thanks, Wolfgang.
> > 
> > > I had some success in shorting the pints with aluminum foil, but you need
> > > to press quite firmly. By far the best is to use or wait for the carbonized
> > > rubber button...
> > 
> > I've used a cooper foil with a current-carrying glue layer.
> 
> Speaking as one that had major issues getting it reflashed (which now isnt a problem with new bootloader).
> I found the best approach to be aluminum foil (also thanks to wolfgang), make sure
> the contacts are clean (they easily get grease on them) also change the foil frequently as
> they also get dirty and stops working.

Thank you for your comment, Kristoffer! May be it could be reasonably
add some words about this receipt to the Wiki?

> Once it took me 2 hours of eager trying before I got into usbmode so just keep at it.

It's just a good time for the meditation about of Qi-circulation in
hardware ;)





More information about the discussion mailing list


interactive