image updates

Sei uryu.sei at gmail.com
Wed Mar 24 12:08:10 EDT 2010


Hi All,

 My Ben goes back. Thanks Wolfgang.

 My mistake is incorrect steps to hard-usb-boot.

(incorrect)
1. Connect USB cable
2. Take off the battery
3. short usbpin and press power button

(correct)
1. Disconnect the USB cable
2. Take off the battery
3. short usbpin and connect USB cable
 (not necessary to press power button)

 After that, transfer u-boot, kernel and rootfs from Linux PC to NAND memory.

Thanks!!

Sei

2010/3/24 Sei <uryu.sei at gmail.com>:
> Hi Wolfgang,
>
>  Thank you for your reply.
>
>  I'm at work and away from my Ben. I'll join the IRC as soon as I get home,
> but it may be too late. So I'd like to describe the steps now.
>
> [Ben]
>  OS: probably 2010-01-10 or 2010-01-13 version
> [PC]
>  OS: ubuntu 9.10
>  toolchain is installed.
>
> 1. [Ben] Power off
> 2. [Ben&PC] Connect USB cable Ben and PC directly.
> 3. [Ben] Press U+Power
> 4. [PC] type lsusb. ID of Ben is found.
> 5. [PC] Download reflash_ben.sh from
> http://downloads.qi-hardware.com/software/images/Ben_NanoNote_2GB_NAND/
> 6. [PC] Run reflash_ben.sh
>  - several minutes later, the process exits with the message 'done.'.
> 7. [Ben] Disconnect USB cable
> 8. [Ben] Press Power button, but it doesn't boot.
>
>  I captured the screen shot of step.6. I can show you it after getting home.
>
> Sei
>
> 2010/3/24 Wolfgang Spraul <wolfgang at sharism.cc>:
>> Sei,
>> great! No worries I think your English is perfect.
>>
>> I would like to understand why some people trash their u-boot when they
>> try to reflash. You are not the first one. In theory this should never
>> happen, but maybe something is wrong with our documentation or
>> reflashing script/tools?
>>
>> What steps did you do originally to reflash the Ben?
>>
>> Let's just chat in IRC, that's by far the easiest and fastest way...
>> Wolfgang
>>
>> On Wed, Mar 24, 2010 at 01:00:05PM +0900, Sei wrote:
>>> Hi Wolfgang,
>>>
>>>  Thank you for your advice.
>>>
>>>  I'm not familiar with English, but I'll try. Thanks a lot!
>>>
>>> Sei
>>>
>>> 2010/3/24 Wolfgang Spraul <wolfgang at sharism.cc>:
>>> > Sei,
>>> >
>>> >>  Thank you for your reply. I didn't known [U + Reset].
>>> >> I'll try it after I arrived home.
>>> >
>>> > If you can, go to the #qi-hardware IRC channel on freenode. Should
>>> > be easy to walk you through step by step, whatever state your Ben
>>> > currently is in...
>>> >
>>> > Wolfgang
>>> >
>>> > _______________________________________________
>>> > Qi Developer Mailing List
>>> > Mail to list (members only): developer at lists.qi-hardware.com
>>> > Subscribe or Unsubscribe: http://en.qi-hardware.com/mailman/listinfo/developer
>>> >
>>>
>>> _______________________________________________
>>> Qi Developer Mailing List
>>> Mail to list (members only): developer at lists.qi-hardware.com
>>> Subscribe or Unsubscribe: http://en.qi-hardware.com/mailman/listinfo/developer
>>
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer at lists.qi-hardware.com
>> Subscribe or Unsubscribe: http://en.qi-hardware.com/mailman/listinfo/developer
>>
>




More information about the discussion mailing list


interactive