Off-button reaction time just temporary?

Cristian Paul Peñaranda Rojas paul at
Sat Aug 20 10:18:28 EDT 2011

I noticed the On button time increase again as usual 
if you wait some minutes to power on the ben again.

Can someone confirm this?

On Sat, Aug 20, 2011 at 01:32:40PM +0400, kyak wrote:
> Wow, wow, wow!
> Just tried it with "/usr/bin/poke 0x10003024 0".
> The reaction to On button is instantanious!!!
> Xiangfu, how about putting this to our start script?
> Bas, this is absolutely awesome, thank you!
> On Wed, 17 Aug 2011, Bas Wijnen wrote:
> >Andrea Bolognani schreef op wo 17-08-2011 om 12:17 [+0200]:
> >>Hold on a second: either I’m utterly mistaken, or the kernel is still far
> >>from being kicked in when the power button is pressed.
> >
> >That is correct. But the delay is made by the rtc, which can be set up
> >when the kernel is running. It will retain its value as long as the rtc
> >has power (that is, when you remove the battery, you lose both the
> >current time and this setting).
> >
> >> I always assumed
> >>the circuitry needed that delay, and it was not avoidable.
> >
> >It is avoidable, and I don't see a reason to use it.
> >
> >>Are you telling me that I’ve been wrong the whole time, and that it is
> >>possible to achieve instant—boot making changes to the software only?
> >
> >Yes. If the kernel sets the rtc register, it will instant-boot from then
> >on, until the power on the rtc goes down (which should never happen).
> >
> >I propose to write the rtc register on every boot, so that even if the
> >battery was removed and the setting was lost, it still only results in
> >the delay once.
> >
> >I'm talking about register HWFCR, page 131 of the programmer's manual.
> >Writing 0 to this register (0x10003024) will remove the delay.
> >
> >Thanks,
> >Bas
> >
> >
> >
> >_______________________________________________
> >Qi Hardware Discussion List
> >Mail to list (members only): discussion at
> >Subscribe or Unsubscribe:

> _______________________________________________
> Qi Hardware Discussion List
> Mail to list (members only): discussion at
> Subscribe or Unsubscribe:

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <>

More information about the discussion mailing list