Problems setting up mpd on the nanonote - no files found

kyak bas at bmail.ru
Mon Jul 4 03:19:34 EDT 2011


Hi Niels,

What are your files format? If they are mp3, it won't be played because 
mpd is built without mp3 support in release images.

You would have to build your own mpd (and libmad) with 
CONFIG_BUILD_PATENTED flag.

On Sun, 3 Jul 2011, Niels Felsted Thorsen wrote:

> Hi
>
> I'm trying to setup mpd and mpc/ncmpc to play music on my
> nanonote, but no succes so far.
>
> mpd seems to start up ok, but it can't find any music files, and I
> end up with an empty database.
>
> I'm using the latest image from 2011-05-28.
>
> Here is the relevant lines from my mpd.conf
>
> ,----[ /etc/mpd.conf ]
> | music_directory         "/data/music"
> | playlist_directory      "~/.mpd/playlists"
> | db_file                 "~/.mpd/database"
> | log_fil                 "~/.mpd/log"
> | pid_file                "~/.mpd/pid"
> | state_file              "~/.mpd/state"
> | log_level               "verbose"
> `----
>
> All the files and directories exists, and are owned and readable by
> root, including the music files.
>
> After running "mpc update" to update the database I can only se the
> directories under /data/music, but they are all empty. Browsing with
> ncmpc shows no files.
>
> Here is the log:
>
> Jul 03 14:27 : state_file: Loading state file /root/.mpd/state
> Jul 03 14:27 : client: [0] opened from 127.0.0.1:35422
> Jul 03 14:27 : client: [0] process command "lsinfo """
> Jul 03 14:27 : client: [0] command returned 0
> Jul 03 14:27 : client: [0] closed
> Jul 03 14:27 : client: [1] opened from 127.0.0.1:35423
> Jul 03 14:27 : client: [1] process command list
> Jul 03 14:27 : client: command_process_list: process command "update """
> Jul 03 14:27 : update: spawned thread for update job id 1
> Jul 03 14:27 : client: command_process_list: command returned 0
> Jul 03 14:27 : update: starting
> Jul 03 14:27 : client: [1] process command list returned 0
> Jul 03 14:27 : client: [1] process command list
> Jul 03 14:27 : client: command_process_list: process command "status"
> Jul 03 14:27 : mixer: Failed to read mixer for 'default detected output': no such mixer control: PCM
> Jul 03 14:27 : client: command_process_list: command returned 0
> Jul 03 14:27 : client: command_process_list: process command "currentsong"
> Jul 03 14:27 : client: command_process_list: command returned 0
> Jul 03 14:27 : client: [1] process command list returned 0
> Jul 03 14:27 : client: [1] closed
> Jul 03 14:27 : update: finished
> Jul 03 14:27 : client: [2] opened from 127.0.0.1:35424
> Jul 03 14:27 : client: [2] process command "lsinfo """
> Jul 03 14:27 : client: [2] command returned 0
> Jul 03 14:27 : client: [2] closed
> Jul 03 14:27 : state_file: Saving state file /root/.mpd/state
> Jul 03 14:27 : listen: listen_global_finish called
> Jul 03 14:27 : db_finish took 0.000000 seconds
>
>
> -- 
> Niels
>
> _______________________________________________
> Qi Hardware Discussion List
> Mail to list (members only): discussion at lists.en.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
>




More information about the discussion mailing list


interactive