Nanonote bricked and dead?
yi at sharism.cc
Thu Jun 16 10:18:55 EDT 2011
1. type command "watch lsusb" in the terminal
2. press and hold down "U" key while plug USB cable to computer
3. if no entry of "601a:4740" shows up, keep holding "U" key, press power button.
==> do you see "601a:4740" shows up?
On Jun 16, 2011, at 9:18 PM, Rubén Berenguel wrote:
> Hi Wolfgang, thanks for the encouragement.
> Cleaned with alcohol and went through the shortening sequence in the
> unbrick page... 3 times. No luck. The only lifesign from the Ben is
> that when I plug it, the red light flickers as expected.
> I am not confident with a soldering iron at all, but if it is the only
> solution, well...
> On Thu, Jun 16, 2011 at 04:14, Wolfgang Spraul <wolfgang at sharism.cc> wrote:
>> we'll get it back up :-)
>> Yes, let's focus on the USB IDs first, that's the faintest sign of life
>> we can get. You can try to clean the USB boot pins with some alcohol.
>> The soldering solution is a bit hardcore, but if you have an iron
>> availabel and feel confident, you can try.
>> Our goal is to make 601a:4740 show up in lsusb...
>> Sorry for the inconvenience, let's see how it goes,
>> Qi Hardware Discussion List
>> Mail to list (members only): discussion at lists.en.qi-hardware.com
>> Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
> Qi Hardware Discussion List
> Mail to list (members only): discussion at lists.en.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
More information about the discussion