Nanonote bricked and dead?
David Reyes Samblas Martinez
davidsamblas at tuxbrain.com
Thu Jun 16 15:39:56 EDT 2011
El 16/06/2011 21:34, "David Reyes Samblas Martinez" <dsamblas at gmail.com>
> El 16/06/2011 18:21, "Rubén Berenguel" <ruben at mostlymaths.net> escribió:
>> So far, no luck. I even tried putting a little piece from a silver
>> sheet (thin one, for stamp silvering) between the rubber button and
>> the pins to get a better connection (silver is a good conductor). I'll
>> keep trying.
>> I bought it from tuxbrain, 1.3 years ago or so. I don't know how much
>> warranty I had, I guess I have the form lying around somewhere. Maybe
>> David can share some more light in this part :)
> NanoNote (as all devices by EU law) has two years of warranty you still
> covered :)
>> I'll keep trying, and maybe look for a soldering iron...
>> On Thu, Jun 16, 2011 at 18:03, Wolfgang Spraul <wolfgang at sharism.cc>
>> >> no luck. I had already tried pressing U and different power
>> >> combinations, I just tried again and even using the battery as an
>> >> alternative power switch... No result. As good as dead for now, at
>> >> least the red light still goes on... It is not completely dead.
>> > Shorting the USB boot pins is the gold standard in all this. If
>> > that cannot get you the 601a:4740 back, I'd say you need a new Nano :-)
>> > I really want to understand what happened to the device, I think it
>> > should be within the warranty so just return it to Tuxbrain and
>> > will ship you a new one?
>> > Where did you buy your Ben?
>> > As a last resort, you can still try to short the USB boot pins with
>> > a soldering iron...
>> > Wolfgang
>> > _______________________________________________
>> > Qi Hardware Discussion List
>> > Mail to list (members only): discussion at lists.en.qi-hardware.com
>> > Subscribe or Unsubscribe:
>> Qi Hardware Discussion List
>> Mail to list (members only): discussion at lists.en.qi-hardware.com
>> Subscribe or Unsubscribe:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the discussion