Hi Adam

The switch hole is in the battery "hole" ?



Can you please check the file:

http://downloads.qi-hardware.com/hardware/qi_avt2/kicad/tQi.tar.bz2

There are some kicad footprints, we need some feedback about the size, pitch etc

Thanks


Carlos


On Mon, Aug 31, 2009 at 7:57 AM, Adam Wang <adam@qi-hardware.com> wrote:
Hi,



No, my ideal was totally not good. so we'll have a real like slide switch[1] for bottom of board or slide switch[2] for side of board. But I have to check if having bottom or side of device from layout space check. And check with vendor which one is the most popular and easier get.
Will keep list posted.
Thanks,
Adam

After confirmed with part vendor and checked available layout placement, the selected slide switch[1] for boot selection is located around reset key. Please ref. to [2].
It will need to drill a small hole on bottom mechanical case, so will be a little ugly from bottom view.
Adam

[1] http://www.hy1688.com/SWITCH/SLIDE%20SWITCH/SLIDE/EPS40XX.htm
[2] http://downloads.qi-hardware.com/hardware/qi_avt2/pcb/PLACEMENT/boot_switch.jpg



_______________________________________________
Qi Developer Mailing List
Mail to list (members only): developer@lists.qi-hardware.com
Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer



--
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba@unal.edu.co