Hey,

Sure,no problem. I always use a screw driver, as I don't have any carbonized rubber, but it certainly sounds like the better idea :)

/mirko

-- Sent from my Palm Prē


Wolfgang Spraul schrieb:

Mirko,
on page 5 and 6 we talk about using a screw driver for USB booting.
That has never worked for me, does it really work?
Also it sounds a bit scary because if you use a lot of pressure you
may damage or rip off the test points.
Instead, I believe Yi has sourced carbonized rubber buttons that we
will include with every Ben NanoNote.
http://downloads.qi-hardware.com/hardware/Photos/carbonized_rubber_button.jpg
Maybe we should talk about this button instead?
Wolfgang

On Tue, Nov 10, 2009 at 11:06:26PM +0100, Mirko Lindner wrote:
> Hey,
>
> I had to redo the layout of the manual, the data of b6 and b7 in my scribus
> version was incorrect and I simply didn't notice it. The format *should* now
> be correct.
>
> The new pdf also has all fonts embedded, so that there shouldn't be any
> issue when opening it.
>
> /mirko
>
> PS: I updated the git as well, hope it's all there :)
>
> On Tue, Nov 10, 2009 at 2:32 PM, ZhangJieJing <kzjeef@gmail.com> wrote:
>
> > Hi, Mirko.
> >
> > Yes, I can open the pdf file.
> >
> > but the characters in the png was not good. the gap between characters was
> > too small.
> >
> > Did anyone else noticed that?
> > ---
> > Best regards,
> > Zhang Jiejing
> >
> >
> >
> > On Tue, Nov 10, 2009 at 3:43 PM, Mirko Lindner <mirko@qi-hardware.com>wrote:
> >
> >> Hey Zhang,
> >>
> >> how did you get to this result?
> >>
> >> Did you open the pdf? Did you create a png from scribus?
> >>
> >> Is this a screenshot of you having the pdf open?
> >>
> >> Shouldn't the font be embedded in the pdf?
> >>
> >> /mirko
> >>
> >>
> >> On Sun, Nov 8, 2009 at 3:13 PM, ZhangJieJing <kzjeef@gmail.com> wrote:
> >>
> >>> Hi,
> >>>
> >>> I noticed the font is not very portable, the attach is the Screenshot on
> >>> my ubuntu.
> >>>
> >>> as the screenshot show, the words ar*e crowd together.
> >>> *
> >>> ---
> >>> Best regards,
> >>> Zhang Jiejing
> >>>
> >>>
> >>>
> >>> On Sun, Nov 8, 2009 at 1:59 AM, Mirko Lindner <mirko@qi-hardware.com>wrote:
> >>>
> >>>> Hey Carlos,
> >>>>
> >>>> On Sat, Nov 7, 2009 at 3:07 PM, Carlos Camargo <cicamargoba@gmail.com>wrote:
> >>>>
> >>>>> Can you publish the source of this PDF?
> >>>>
> >>>>
> >>>> So done :) [1]
> >>>>
> >>>>
> >>>>> We will help you :)
> >>>>>
> >>>>
> >>>> Heh, that would be nice :)
> >>>>
> >>>> /mirko
> >>>>
> >>>> [1]
> >>>> http://projects.qi-hardware.com/index.php/p/ben-nanonote/source/tree/master/
> >>>>
> >>>>
> >>>>>
> >>>>>
> >>>>> Carlos
> >>>>>
> >>>>>
> >>>>> On Sat, Nov 7, 2009 at 8:38 AM, Peter Malte Mack <
> >>>>> mack.petermalte@googlemail.com> wrote:
> >>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> nice work - but I believe you should replace openwrt.com by
> >>>>>> openwrt.org (page 8)
> >>>>>>
> >>>>>> Peter
> >>>>>>
> >>>>>>
> >>>>>> On Sat, Nov 7, 2009 at 2:17 PM, Mirko Lindner <mirko@qi-hardware.com>wrote:
> >>>>>>
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> On Sat, Nov 7, 2009 at 1:12 PM, rakshat hooja <rakshat@gmail.com>wrote:
> >>>>>>>
> >>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>> As ben will ship without a wifi card I would look at including USB
> >>>>>>>>>> networking and forwarding internet howto from the wiki too unless space in
> >>>>>>>>>> the manual is limited.
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Your are right. Thanks. I uploaded a new version.
> >>>>>>>>>
> >>>>>>>>> /mirko
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>> Ethernet over USB at top of the page and SSH below that makes more
> >>>>>>>> sense to me. (checking ping first before SSH)
> >>>>>>>>
> >>>>>>>
> >>>>>>> I changed the outline of the HowTo's a bit. The first now describes
> >>>>>>> ethernet over USB including ssh and the second how one can forward internet
> >>>>>>> access over USB.
> >>>>>>>
> >>>>>>> /mirko
> >>>>>>>
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Thanks
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Rakshat
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> Qi Developer Mailing List
> >>>>>>>> Mail to list (members only): developer@lists.qi-hardware.com
> >>>>>>>> Subscribe or Unsubscribe:
> >>>>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Qi Developer Mailing List
> >>>>>>> Mail to list (members only): developer@lists.qi-hardware.com
> >>>>>>> Subscribe or Unsubscribe:
> >>>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Qi Developer Mailing List
> >>>>>> Mail to list (members only): developer@lists.qi-hardware.com
> >>>>>> Subscribe or Unsubscribe:
> >>>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Carlos Iván Camargo Bareño
> >>>>> Profesor Asistente
> >>>>> Departamento de Ingeniería Eléctrica y Electrónica
> >>>>> Universidad Nacional de Colombia
> >>>>> cicamargoba@unal.edu.co
> >>>>>
> >>>>> _______________________________________________
> >>>>> Qi Developer Mailing List
> >>>>> Mail to list (members only): developer@lists.qi-hardware.com
> >>>>> Subscribe or Unsubscribe:
> >>>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> Qi Developer Mailing List
> >>>> Mail to list (members only): developer@lists.qi-hardware.com
> >>>> Subscribe or Unsubscribe:
> >>>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>>
> >>>
> >>>
> >>> _______________________________________________
> >>> Qi Developer Mailing List
> >>> Mail to list (members only): developer@lists.qi-hardware.com
> >>> Subscribe or Unsubscribe:
> >>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>>
> >>
> >>
> >> _______________________________________________
> >> Qi Developer Mailing List
> >> Mail to list (members only): developer@lists.qi-hardware.com
> >> Subscribe or Unsubscribe:
> >> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >>
> >
> >
> > _______________________________________________
> > Qi Developer Mailing List
> > Mail to list (members only): developer@lists.qi-hardware.com
> > Subscribe or Unsubscribe:
> > http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
> >

> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer@lists.qi-hardware.com
> Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer

_______________________________________________
Qi Developer Mailing List
Mail to list (members only): developer@lists.qi-hardware.com
Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer