what is 
cat /sys/class/power_supply/battery/voltage_now
output?


On Sat, Jan 23, 2010 at 1:16 AM, Richard Chávez <rjchavezb@gmail.com> wrote:
Thank you Zhang JieJing.

I tried it but I am getting a -145 every time (even with only the usb
cable plugged and no battery) is it OK?
this is not ok, I think some there is wrong.
 
What should I expect if the
battery voltage is low?

Not sure for now, I think maybe the power daemon should be deal with too low voltage,
but we don't have it now. 
 

2010/1/22 ZhangJieJing <kzjeef@gmail.com>:
> Hi Richard,
> you can try this:
> #cat  /sys/class/power_supply/battery/capacity
> ---
> Best regards,
> Zhang Jiejing
>
>
> 2010/1/22 Richard Chávez <rjchavezb@gmail.com>
>>
>> Hello Everybody,
>>
>> Is there a way (command) to read the battery level on the Nano?
>>
>> Thanks for your help.
>>
>> _______________________________________________
>> Qi Developer Mailing List
>> Mail to list (members only): developer@lists.qi-hardware.com
>> Subscribe or Unsubscribe:
>> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>
>
> _______________________________________________
> Qi Developer Mailing List
> Mail to list (members only): developer@lists.qi-hardware.com
> Subscribe or Unsubscribe:
> http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer
>



--
Ing. Richard Chávez Borja
Microensamble
www.microensamble.com
Teléfono:2172192 - ext 106
Dirección Skype: rjchavezb

_______________________________________________
Qi Developer Mailing List
Mail to list (members only): developer@lists.qi-hardware.com
Subscribe or Unsubscribe: http://lists.qi-hardware.com/cgi-bin/mailman/listinfo/developer