Hi
yesterday I've received 3 SAKC PCBs, I've mounted the board and upload a photo [1]
right now, i flash the u-boot (the qi-u-boot with some modifications), and SAKC now is able to boot U-boot

I'll send the u-boot patch to Xiangfu for merge this new platform to openwrt repository.
the next task is modify the QI-kernel and run openwrt on SAKC


Best regards


Carlos





[1] http://en.qi-hardware.com/wiki/Swiss_Army_Knife_Card

--
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba@unal.edu.co