Hi guys, I'm experiencing steady time-outs when trying to access the wiki @ http://en.qi-hardware.com/wiki/Main_Page

Anyone else?

On Wed, May 5, 2010 at 12:00 PM, <discussion-request@lists.qi-hardware.com> wrote:
Send discussion mailing list submissions to
       discussion@lists.qi-hardware.com

To subscribe or unsubscribe via the World Wide Web, visit
       http://en.qi-hardware.com/mailman/listinfo/discussion
or, via email, send a message with subject or body 'help' to
       discussion-request@lists.qi-hardware.com

You can reach the person managing the list at
       discussion-owner@lists.qi-hardware.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of discussion digest..."


Today's Topics:

  1. Re: Yacas ported? Testers needed (David Reyes Samblas Martinez)
  2. Re: Yacas ported? Testers needed (jirka)
  3. Re: Yacas ported? Testers needed (Wolfgang Spraul)


----------------------------------------------------------------------

Message: 1
Date: Wed, 5 May 2010 00:06:29 +0200
From: David Reyes Samblas Martinez <david@tuxbrain.com>
Subject: Re: Yacas ported? Testers needed
To: "Users mailinglist , support, findings,     use cases and fun"
       <discussion@lists.qi-hardware.com>
Message-ID:
       <l2j5c6ceea81005041506ie9eb2f57lcf3706987540f766@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I will try, but surelly along next week

El d?a 4 de mayo de 2010 23:45, Rub?n Berenguel
<ruben@mostlymaths.net> escribi?:
> Hi,
>
> I just finished a sketch of a Makefile for the automatic installation
> of yacas. Tomorrow night (i.e. 24 hours from now), I hope to have it
> completely finished and tested in my nano (it is somewhat late now and
> I'm tired). I'll need some "beta testers" who know how to use the
> Makefile of a port (like David did with gnuchess in his blog) to check
> that it works correctly.
>
> Please any volunteers send me an email, and I'll send you the folders
> with the makefile and patches and a few additional instructions.
>
> Thanks!
>
>
> --
> ====================================
> * Rub?n Berenguel
> * http://www.mostlymaths.net
> ====================================
>
> _______________________________________________
> discussion mailing list
> discussion@lists.qi-hardware.com
> http://en.qi-hardware.com/mailman/listinfo/discussion
>



--
David Reyes Samblas Martinez
http://www.tuxbrain.com
Open ultraportable & embedded solutions
Ben NanoNote, Arduino, Openmoko
Hey, watch out!!! There's a linux in your pocket!!!



------------------------------

Message: 2
Date: Wed, 05 May 2010 14:06:50 +0200
From: jirka <jirka@penguin.cz>
Subject: Re: Yacas ported? Testers needed
To: "Users mailinglist , support, findings,     use cases and fun"
       <discussion@lists.qi-hardware.com>
Message-ID: <aecfe1bcd48bf1c65a7db473ceaa0c15@penguin.cz>
Content-Type: text/plain; charset=UTF-8

I can be a "beta tester", too.

I already ported few other packages:
http://fast10.vsb.cz/brozovsky/data/ports/

Best regards,
Jiri Brozovsky


On Wed, 5 May 2010 00:06:29 +0200, David Reyes Samblas Martinez
<david@tuxbrain.com> wrote:
> I will try, but surelly along next week
>
> El d?a 4 de mayo de 2010 23:45, Rub?n Berenguel
> <ruben@mostlymaths.net> escribi?:
>> Hi,
>>
>> I just finished a sketch of a Makefile for the automatic installation
>> of yacas. Tomorrow night (i.e. 24 hours from now), I hope to have it
>> completely finished and tested in my nano (it is somewhat late now and
>> I'm tired). I'll need some "beta testers" who know how to use the
>> Makefile of a port (like David did with gnuchess in his blog) to check
>> that it works correctly.
>>
>> Please any volunteers send me an email, and I'll send you the folders
>> with the makefile and patches and a few additional instructions.
>>
>> Thanks!
>>
>>
>> --
>> ====================================
>> * Rub?n Berenguel
>> * http://www.mostlymaths.net
>> ====================================
>>
>> _______________________________________________
>> discussion mailing list
>> discussion@lists.qi-hardware.com
>> http://en.qi-hardware.com/mailman/listinfo/discussion
>>



------------------------------

Message: 3
Date: Wed, 5 May 2010 13:54:26 +0000
From: Wolfgang Spraul <wolfgang@sharism.cc>
Subject: Re: Yacas ported? Testers needed
To: "Users mailinglist , support, findings,     use cases and fun "
       <discussion@lists.qi-hardware.com>
Message-ID: <20100505135426.GA10153@devel.wolf>
Content-Type: text/plain; charset=us-ascii

Jiri,

> I already ported few other packages:
> http://fast10.vsb.cz/brozovsky/data/ports/

wow this is a fantastic site! So clean and well documented...
We don't have a very clean wiki document yet how to get packages into
OpenWrt, the package feed or into the base image.
So I'll just start with something:

*) create an account at http://projects.qi-hardware.com/index.php/login/
*) email me your account name and I will add you to the openwrt-packages and
openwrt-xburst projects as member (Mirko Vogt or other admins of those
projects can do that too)
*) you are then able to commit your package Makefiles using git
*) if you think the work on the Makefile is not finished yet, but you want
to share it already so others can help with the rest, please mark it as
depends = @BROKEN
Then it will not break our automated build process.

Of course anybody can do this, not just Jiri, also myself. It's just a matter
of getting to it, but I thought I document the procedure.
I would love to have some of those tools in our base image or package repo,
I mainly use command line programs on my Nano until now...

Best Regards, thanks again for the great porting work!
Wolfgang



------------------------------

_______________________________________________
discussion mailing list
discussion@lists.qi-hardware.com
http://en.qi-hardware.com/mailman/listinfo/discussion

End of discussion Digest, Vol 4, Issue 6
****************************************