Hi Sebastien

Finally I can create a .bit file, I create a new board for sakc. I don't know why I can't create the .bit file before.

One question: SAKC don't save RAM or ROM memory, just the internal, there is a sample program like hello world running from internal ram 

Carlos



On Wed, May 26, 2010 at 9:00 AM, Sébastien Bourdeauducq <sebastien.bourdeauducq@lekernel.net> wrote:
On Wednesday 26 May 2010 15:53:39 Carlos Camargo wrote:
> I'm using webpack 12.1
> There are differences between your port and the jbornschein / soc-lm32
>  port? I'm trying with MM port

Not so many. MM is historically based on soc-lm32. The LM32 processor has been
upgraded to the new version and I changed many things in the RTL concerning
the bus interconnect, but the build process has remained essentially the same.

Sébastien

_______________________________________________
Qi Developer Mailing List
Mail to list (members only): developer@lists.qi-hardware.com
Subscribe or Unsubscribe: http://en.qi-hardware.com/mailman/listinfo/developer



--
Carlos Iván Camargo Bareño
Profesor Asistente
Departamento de Ingeniería Eléctrica y Electrónica
Universidad Nacional de Colombia
cicamargoba@unal.edu.co